New Case Study – Aerzen VML60 vacuum Pump

Posted on by Andrea Vose

New Case Study – Aerzen VML60 vacuum Pump. The job was carried out at our facility in Doncaster and involved the following steps

  1. The  pump was fully disassembled offsite at VPSN
  2. Completely degreased and thoroughly cleaned via Aqua Blasting
  3. We removed existing bearings and replaced with all new bearings
  4. We removed existing gaskets and replaced with all new gaskets
  5. We removed existing O rings and replaced with all new O Rings
  6. We removed existing oil filter and replaced new oil filter
  7. We then completely rebuilt the pump
  8. We then reset end float and gear timings
  9. We replaced the old oil with new oil and repainted the pump before testing and recording all figures for a 4 hour period to ensure it was running smoothly and like new

If you have a pump/pumps that would benefit from a complete overhaul get in touch.